Análisis de la resistencia a la corrosión de juntas soldadas en aluminio AL5083 mediante el proceso GMAW-P

Patarroyo Benitez, David Alejandro

Análisis de la resistencia a la corrosión de juntas soldadas en aluminio AL5083 mediante el proceso GMAW-P

dc.contributor.advisor	Rojas Molano, Hector Fernando
dc.contributor.author	Patarroyo Benitez, David Alejandro
dc.coverage.spatial	Bogotá	spa
dc.date.accessioned	2022-05-26T17:09:54Z
dc.date.available	2022-05-26T17:09:54Z
dc.date.issued	2015
dc.description.abstract	Se investigó el comportamiento de la resistencia a la corrosión en juntas soldadas entre Al5083-H116 en Stock y Al5083-H116 envejecido naturalmente en servicio, dichas juntas fueron soldadas mediante el proceso GMAW- P. Las placas utilizadas presentaban las siguiente medidas: 300x150x4.6 mm, el material de aporte utilizado fue ER5356, con argón al 100% como gas de protección. Se realizaron estudios de Microscopia Óptica Convencional en base a ataque con ácido fosfórico, Microscopia Electrónica de Barrido (SEM), Inmersión en ácido nítrico NAMLT y Exfoliación por inmersión ASSET, a fin de conocer si el envejecimiento natural afecta las propiedades de resistencia a la corrosión de las juntas soldadas y la aparición y evolución de los fenómenos corrosivos en las mismas. Asimismo se soldaron dos grupos de control, juntas soldadas netamente con Al5083- H116 Nuevo y juntas soldadas netamente con Al5083-H116 envejecido naturalmente.	spa
dc.description.abstractenglish	It was investigated the corrosion resistance behavior of a welded joint between an alloy of Al5083-H116 in stock and A l 5 0 8 3 - H 1 1 6 naturally aged w e l d e d by the process GMAW-P, the sheet used had the following measured: 300x150x4.6 mm, the electrode used was ER5356, with 100% argon as protection gas. There were realized studies of Optical Conventional Microscopy based on phosphoric etch, Scanning Electron Microscope SEM, nitric acid immersion essay NAMLT, and immersion peel test ASSET, in order to know if the natural aging affects the corrosion resistance behavior of the welded joints and the appearance and evolution of corrosion phenomenon in the same. Two control groups also were welded, one only with Al5083-H116 Newly and welded joints and another with Al5083-H116 aged naturally only.	spa
dc.description.sponsorship	Universidad Libre – Facultad de Ingeniería -- Ingeniería Mecánica	spa
dc.format	PDF	spa
dc.identifier.uri	https://hdl.handle.net/10901/22562
dc.language.iso	spa	spa
dc.relation.references	VERA, R, et al.Corrosión por picaduras del aluminio y de la aleación Al-6201 … en soluciones NaCl. En: Consejo Superior de Investigaciones Científicas. Licencia CreativeCommons 3.0 España, 1997	spa
dc.relation.references	BAUTISTA, A.l., et al.Comportamiento del aluminio desnudo y anodizado en… atmósferas con grados de contaminación muy diferentes. En: Consejo.Superior de Investigaciones CientíficasLicencia CreativeCommons 3.0 . España, 1998	spa
dc.relation.references	GRELLA, Ch.Selección de los parámetros de pulso en la Soldadura de aleaciones al-si y al-mg con el proceso GMAW-P.Universidad Central de Venezuela. Caracas. 2001	spa
dc.relation.references	TORRES, Jaime. Evolución microestructural de la aleación de aluminio 6061 durante el proceso de soldadura MIG.Ingeniería & Desarrollo. Universidad del Norte. Colombia. 2002	spa
dc.relation.references	CARREÑO, Alexander. Influencia de la deformación plástica y el tamaño de grano en el comportamiento electroquímico de la aleación de aluminio 7075-T7351 en medio ácido y salino. Universidad Central de Venezuela. Caracas. 2003	spa
dc.relation.references	KUS E.; Lee Z.; Nutt S. y Mansfeld F. A. “Comparison of the Corrosion Behavior of Nanocrystalline and Conventional Al 5083 Samples”. Corrosion, ProQuest Science Journals, Pág.152. 2006	spa
dc.relation.references	PAREDES, Solange; Hidalgo, Benjamin. El uso de la interferometría óptica para evaluar corrosión por picadura en la aleación comercial de aluminio 3003. En: Rev. LatinAm. Metal. Mat. 2006, pag46-52	spa
dc.relation.references	TRUJILLO, Luciano.Elaboración de un procedimiento para el soldeo del aluminio naval alloy-5086-h116 a ser utilizado en la construcción de embarcaciones fluviales. Facultad de posgrados. Universidad Libre de Colombia. Bogotá. 2008	spa
dc.relation.references	POSADAS, Carlos. Efecto de la corrosión salina en el comportamiento de la vida en fatiga de una aleación 2024-T3 de aplicación aeronáutica. Instituto Politecnico Nacional. Mexico D.F. 2009	spa
dc.relation.references	DIAZ, J.E., et al. Efecto de la corrosión en la resistencia a la tracción de las aleaciones UNS A92024 y UNS A97075.Dpto. Ingeniería Mecánica y Diseño Industrial. Escuela Superior de Ingeniería. Universidad de Cádiz. Chile. 2010	spa
dc.relation.references	ANDRADE, Yovanny y Rico Yraima.Caracterización estructural de la soldadura MIG, en láminas de aluminio aa-5356. Revista Digital de Investigación y Postgrado, ISSN 2244-7393, Vol. 2, Nº. 4, 2012, pg. 318-327.	spa
dc.relation.references	HERNANDEZ, Jeanette y LEAL Carlos. Evaluación de la resistencia a la corrosión de aleaciones de aluminio AA 6063 y AA 8011 anodizadas, utilizando diferentes métodos de sellado. En: REDIP. UNEXPO. VRB. Venezuela. Vol. 2. No. 5 Octubre 2012	spa
dc.relation.references	THAILUMA, Coa. Evaluación de la resistencia a la corrosión de una lamina de aluminio AA-3003 doblada a diferentes ángulo.Revista Digital de Investigación y Postgrado, ISSN-e 2244-7393, Vol. 2, Nº.5, 2012, págs. 363-367	spa
dc.relation.references	ROMERO Sandra Patricia y Olaya Florez Jhon Jairo. Influencia de la transferencia por arco sobre la microestructura de uniones soldadas usando arco pulsado. En: Revista Electronica IM Ingeniería Mecánica. Vol. 16. No. 1,. eneroabril, 2013, pags 1-12	spa
dc.relation.references	MUTOMBO, Kalenda y DO TOiT, Madeleine. “Corrosion Fatigue Behaviour of Aluminium 5083-H11 Welded Using Gas Metal Arc Welding Method”. Arc Welding,Prof, Wladislav Sudnik. Pág.177-218, ISBN 978-953-307642-3. Publicado por Intech,2011	spa
dc.relation.references	GOSWAMI, R; SPANOS G; PAO, P.S. And Holtz R.L. “Microstructural Evolution and Stress Corrosion Cracking Behavior of Al-5083”, Vol.42A, Metallurgical and Materials Transactions A. February 2011	spa
dc.relation.references	SUKIMAN, N.L., et al.(2013) "Durability and Corrosionof Aluminum and Its Alloys:. Overview, Property Space, Techniques and Developments chapter two". InTech EUROPE Open Science	spa
dc.relation.references	ASKELAND, Donald R. y PHULÉ, Pradeep P. Ciencia e Ingeniería de los. Materiales4°Ed. México.: International Thomson Editores S. A, 2006. Pág.593	spa
dc.relation.references	Manual del aluminio, 2°Ed.Espala Reverté Editorial, 1994	spa
dc.relation.references	GROOVER, Mikell P. Fundamentos de Manufactura moderna 3° Ed, México. …….McGraw Hill, 2007	spa
dc.relation.references	DIETER, George. Metalurgia mecánica. McGraw Hill, 1986	spa
dc.relation.references	McGraw Hill, interamericana de España definiciones	spa
dc.relation.references	AWS D1.2/D1.2M (2003). StructuralWeldingCode – Aluminum	spa
dc.relation.references	AWS D 3.7-90 Guide forAluminum Hull Welding	spa
dc.relation.references	AWS D1.1/D1.1M-06 StructuralWelding Code-Steel	spa
dc.relation.references	AWS D1.2/D1.2M:2003, Structural Welding Code – Aluminum	spa
dc.relation.references	Statistics “International Aluminium Association”, Consultado mayo 2013, En: http://primary.world-aluminium.org/aluminium-facts/industry structure. html	spa
dc.relation.references	E.P DeGarmo, J.T Black, R.A Kosher(1999).Materiales y procesos de fabricación, Segunda edición página Ed. Prentice-Hall. ISBN 0-471-36679	spa
dc.relation.references	SEARLES, J.M y Gouma, P.I. (2001)”Stress Corrosion Cracking of Sensitized AA5083” metallurgical and material trasaction, volume 23a	spa
dc.relation.references	RAJASEKARAM, S.“Weld Bead Characteristics in Pulsed GMA Welding of AlMg Alloys”. Welding Journal, Vol.12, Pág.397-407. 1999	spa
dc.relation.references	GHOSH, P K y GHOSH, Aritra K. “Control of Residual Stresses Affecting Fatigue Life of Pulsed Current Gas-Metal-Arc Weld of High Strength of aluminum alloy”. Metallurgical and Materials Transactions, Vol.35A, Pág.2439-2444. ; Aug 2004	spa
dc.relation.references	TAO, M. (1997). “Weldability of AL-Zn-Mg Alloys” Thesis Delft University of Technology, Dutch	spa
dc.relation.references	MENZEMER, C C; LAM, P C; Wittell, C F; Srivatsan, T S. “A study of fusion zone microstructures of arc-welded joints made from dissimilar aluminum alloys”. Journal of Materials Engineering and Performance; Apr 2001; Vol.10-2; pag. 173- 177	spa
dc.relation.references	KATSAS J. NIKOLAOU, y G. Papadimitriou. (2006).“Microstructural changes accompanying repair welding in 5xxx aluminium alloys and their effect on the mechanical properties”. Materials and Design 27	spa
dc.relation.references	DON-HYUN, C; Byung-Wook, A; y Seung-Boo J, “Behavior of b phase (Al3Mg2) in AA 5083 during friction stir welding”. School of Advanced Materials Science and Engineering, Sungkyunkwan University, Cheoncheon-dong, Jangangu, Gyeonggi-do 440-746, South Korea Mechanical Engineering Department, University of Rochester, 240 Hutchinson Road Rochester, NY 14627, USA	spa
dc.relation.references	SHOBAKO, S; TANAKA, T y OHJI Sato “Characteristics of hollow cathode arc as welding heat source. Application of hollow cathode arc to welding of 2219 and 5083 aluminium alloys” Welding International 2006 20 (7) 532–537	spa
dc.relation.references	SIKORA, E; Wei, X. J y Shaw, B. A.” Corrosion Behavior of Nanocrystalline Bulk Al- Mg-Based Alloys. Corrosion”; Apr 2004; 60, 4; ProQuest Science Journals, pag. 387,2004	spa
dc.relation.references	SABERIA, R ; SEYEDMAHDI, H y HESHMATDEHKORDIB, E “Investigation of the Effects of Preheat Temperature on the Microstructure of Al-5083 Alloy in GMAW Welding”, Iranian Corrosion Association, Journal of Materials Engineering, Vol.6, No 2. 2012	spa
dc.relation.references	BLOEM, C.A.; SALVADOR, M. D y VICENTE, A. “Comportamiento a fatiga de uniones soldadas GMAW de la aleación de aluminio AA 7020.” Revista de metalurgia, Vol.43-2, Pág.111-116, 2007. ISSN: 0034-8570	spa
dc.relation.references	CRAIG, H. L. Jr., “Nitric Acid Weight Loss Test for the H116 and H117 Tempers of 5086 and 5456 Aluminum Alloys,” Localized Corrosion—Cause of Metal Failure, ASTM STP 516, ASTM, 1972, pp. 17–37	spa
dc.relation.references	VILICA. Pedro, Nuno Pépe, Luísa Quintino.”METALLURGICAL AND CORROSION FEATURES OF FRICTION STIR WELDING OF AA5083-H111”. Technical University of Lisbon, Instituto Superior Técnico, Portugal.2005	spa
dc.relation.references	HAKEM, Maamar; LEBAILI, S; MIROUD, J; BENTALEB, A; TOUKALI, S. “Welding and Characterization of 5083 Aluminum Alloy”. METAL2012 Brno, Czech Republic, EU.2012	spa
dc.relation.references	CHACON N., Freddy G.; PATARROYO B., David A.; PARDO G. Fernando D.; ROJAS, Hector; SIERRA, Mauricio. “Estudio de la Microestructura, de las propiedades Mecánicas y de la resistencia a la Corrosión en juntas soldadas entre Aluminio Al5083-H166 Nuevo y Al5083-H116 Envejecido Naturalmente en Servicio mediante el proceso GMAW-P”. Congreso Internacional de Metalurgia y Materiales SAMCONAMET/IBEROMAT/MATERIA 2014 Santa Fe, Argentina. Octubre, 2014. ISBN 978-987-692-043-8	spa
dc.relation.references	CORMARCK, Emily C. “The effect of sensitization on the stress corrosion cracking of aluminum alloy 5456”. Thesis of master of science in mechanical engineering. Lieutenant, United States.: Naval postgraduate School. June 2012,101p	spa
dc.relation.references	GUNSON, James. “Effect of sensitisation on the corrosion fatigue properties of aa5456-h116”. A thesis submitted to university of Birmingham for the degree of Masters of Research (MRes) Materials and Metallurgy University of Birmingham. September 2010	spa
dc.relation.references	KINGA A. Unocic. “Structure-composition-property relationships in 5xxx series aluminum alloys”. Presented in Partial Fulfillment of the Requirements for the Degree Doctor of Philosophy in the Graduate School of The Ohio State. University The Ohio State University 2008,293p	spa
dc.relation.references	SCOTT, Brian. “The role of stress in the corrosion cracking of aluminum alloys”. Monterey, California. Naval Postgraduate School, Thesis of Master of Science in mechanical engineering. Lieutenant, United States. 2013-03, 82p	spa
dc.relation.references	MENZEMER, C C; LAM, P C; WITTELL, C F; SRIVATSAN, T S. “A study of fusion zone microstructures of arc-welded joints made from dissimilar aluminum alloys”. Journal of Materials Engineering and Performance; Apr 2001; Vol.10-2; pg. 173-177	spa
dc.relation.references	NOZATO R, Ishihara S. Calorimetric study of precipitation process in aluminum-magnesium alloys. Transactions of the Japan Institute of Metals1980;21:580	spa
dc.relation.references	KOMAROVA, M. F, L. I. Kaganovich, Microstructure and Corrosion Properties of an Aluminum-Magnesium Alloy After Long Natural Ageing. Fiz.Metal.Metalloved. 1973; 36: 258	spa
dc.relation.references	POLLARD, WA. Long-term aging behavior of aluminum-10 percent magnesium casting alloys. Journal of the Institute of Metals 1965;93: 339	spa
dc.relation.references	ALEO, V; MADUGULA, MK. S; BALACHANDAR, R. “Development of an equation for aluminum alloys to determine the width of the zone affected by welding”. Canadian Journal of Civil Engineering; 33, 2; ProQuest Science Journals pg. 151. Feb 2006	spa
dc.relation.references	DON-HYUN, Choi; BYUNG-WOOK, Ahn , DAVID, J.Quesnel ; SEUNG-BOO, Jung. “Behavior of b phase (Al3Mg2) in AA 5083 during friction stir welding”. Intermetallics Vol.35, Pág.120 -127. 2013	spa
dc.relation.references	AMERICAN SOCIETY FOR METALS. ASM International Materials Park, OH 44073	spa
dc.relation.references	ASM METALS HANDBOOK. “Alloy Phase Diagrams”, Vol.3, ASM International, 1998	spa
dc.relation.references	ASM METALS HANDBOOK. “Atlas of Microstructures of Industrial Alloys”, Vol.7, 8.Ed, ASM International, Pág. 241-244.1972	spa
dc.relation.references	ASM METALS HANDBOOK. “Heat Treating”, Vol.4, ASM International, 1998	spa
dc.relation.references	ASM METALS HANDBOOK. “Metallography and Microstructures”,Vol.9, ASM International, 2004	spa
dc.relation.references	AMERICAN SOCIETY FOR TESTING AND MATERIALS, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959	spa
dc.relation.references	ASTM E03. “Standard Guide for Preparation of Metallographic Specimens”.2001	spa
dc.relation.references	ASTM E1245. “Standard Practice for Determining the Inclusion or SecondPhase Constituent Content of Metals by Automatic Image Analysis”.2008	spa
dc.relation.references	ASTM E340, “Standard Test Method for Macroetching Metals and Alloys”.2000	spa
dc.relation.references	ASTM E407. “Standard Practice for Microetching Metals and Alloys” .1999	spa
dc.relation.references	ASTM G67. “Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)”. 2013	spa
dc.relation.references	ASTM G66. ”Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test)”. 2013	spa
dc.relation.references	ASTM E1508.”Standard Guide for Quantitative Analysis by EnergyDispersive Spectroscopy”. 2012	spa
dc.relation.references	ASTM F1877. “Standard Practice for Characterization of Particles”.2010	spa
dc.relation.references	ASTM B928. “Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service and Similar Environments”. 2014	spa
dc.relation.references	Polmear I. J., Light Alloys-Metallurgy of the Light Metals, pp.32, Edward Arnold,1981	spa
dc.relation.references	Y. Kim RGB. A characterization of inhibiting effect of Cu on metastable pitting in dilute Al-Cu solid solution alloys. Electrochimica Acta 2007;52:2437	spa
dc.relation.references	Sprowls, D. O., Walsh, J. D., and Shumaker, M. B.'Simplified Exfoliatioa Testing of Aluminum Alloys," Localized Corrosion—Cause of Metal Failure, ASTM STP 516, American Society for Testing and Materials, 1972, pp. 38 65	spa
dc.relation.references	Brooks, C. L., Naval Engineers Journal, NVEJA, Aug. 1969, pp. 29-32	spa
dc.relation.references	Ketcham, S. J. and Shaffer, I. S., "Exfoliation Corrosion of Aluminum AUoys," Localized Corrosion—Cause of Metal Failure, ASTM STP 516, American Society for Testing and Materials, 1972,pp. 3-16	spa
dc.rights.accessrights	info:eu-repo/semantics/openAccess	spa
dc.rights.coar	http://purl.org/coar/access_right/c_abf2	spa
dc.rights.license	Atribución-NoComercial-SinDerivadas 2.5 Colombia
dc.rights.uri	http://creativecommons.org/licenses/by-nc-nd/2.5/co/
dc.subject	Al5083-H116	spa
dc.subject	Corrosión intergranular	spa
dc.subject	Envejecimiento natural	spa
dc.subject	Nalmt	spa
dc.subject	Asset	spa
dc.subject	Exfoliación	spa
dc.subject	Pitting	spa
dc.subject.lemb	Resistencia a la corrosión	spa
dc.subject.lemb	Ingeniería mecánica	spa
dc.subject.subjectenglish	Al5083-H116	spa
dc.subject.subjectenglish	Corrosion	spa
dc.subject.subjectenglish	Natural aging	spa
dc.subject.subjectenglish	ER5356	spa
dc.subject.subjectenglish	Welding	spa
dc.title	Análisis de la resistencia a la corrosión de juntas soldadas en aluminio AL5083 mediante el proceso GMAW-P	spa
dc.type.coarversion	http://purl.org/coar/version/c_ab4af688f83e57aa
dc.type.driver	info:eu-repo/semantics/bachelorThesis	spa
dc.type.hasversion	info:eu-repo/semantics/acceptedVersion	spa
dc.type.local	Tesis de Pregrado	spa